Featured
Coke Clean Battery Terminals
Coke Clean Battery Terminals. Apply the coca cola and let it work its magic. Remove the negative cable first, followed by the positive side terminal.

Switch off the car engine to cut off the power. Remove rust by spraying wd40 and scrub with a stiff bristle brush. I’d avoid using it at all.
To Fix A Corroded Battery, Cover It With Baking Soda.
Once you remove the terminal cover, you will. Scrub the rust and corrosion off with moderate force. Wait a bit to let the mixture sit on the terminals and the rust will break away.
Let It Soak In For About 5 Minutes.
Next, disconnect the positive terminal. How to clean battery terminals with coke? Not surprising, the guy in the video does use coke to clean the car battery terminals.
Then Pour Water On The Terminals.
However, nothing beats the fun of doing the old coca cola trick. Here are the important steps on how to clean the battery terminal. Remove the negative cable first, followed by the positive side terminal.
Smear The Baking Soda Paste Onto The Battery Connections And The 2 Terminals At The End Of Each Battery Using The Cotton Swab.
Start by disconnecting the negative terminal. Wd40 loosens rust, dirt, oil, moisture, and more from the terminals. I have never used coke and frankly think it is a waste of money.
Slowly At A Very Near Distance From The Terminal Post, Pour Coke On The Corroded Battery Terminals.
This will neutralize the battery acid. Battery terminal corrosion is slightly different depending upon whether it is on a car battery or in a piece of electronic kit, but you can deal with it in much the same way. Apply the coca cola and let it work its magic.
Comments
Post a Comment